H 2 O 3 is a thermoelectric (Peltier) chilling device. This unit is designed for handling and storing small sample tubes at icy
temperature. The samples on its aluminum sample blocks can be automatically maintained at 16 ºC when connected to the
electricity outlet via the provided 12 V DC power adaptor. It is a simple and convenient replacement of wet ice bucket in many
occasions. Model H 2 O 3 -96L can chill one standard 96-well PCR plate. Model H 2 O 3 -96L can be special ordered to be set at any

other constant temperature, for example, 16 ºC.

Contents of Package
-One thermoelectric chilling device, model H 2 O 3 -96L
-One 12 V power supply adaptor
-One sample block cover
-One block extractor
-One User Manual

Specifications
- Operation ambient temperature: 8~30ºC
-Sample block steady state temperature: 16ºC
-Electrical input: 12 VDC, 5A
-Dimensions: 185×185×90 mm (7.25×7.25×3.5 in)
-Net Weight (with blocks): ~2.5kg

Instruction
Placed on lab bench or a similar sturdy and flat surface. The space between the bottom of the unit and the bench should be clear. The sides of the unit should also have at least one inch (2.5 cm) of clearance to allow
unobstructed ventilation.

Select the proper size or a combination of blocks according to your sample tube sizes. Notice that the common 0.5-ml tubes can be
comfortably inserted into either size of the provided sample blocks. (Please contact your dealer for other types of standard or non-standard blocks.) Insert sample blocks in the opening and make certain that the sample blocks are in close contact with the cold plate (Fig. 1). Connect the 12 V DC power adaptor to the DC input terminal on the back of the unit (Fig. 2).
Plug the power supply into a wall outlet, and turn on the power switch on the back of the unit (Fig. 2). The block should start to chill immediately.

Temperature Display: While the device is on, the LED display shows actual temperature on the right side and shows set point on the left side.
It is recommended to cover the samples with the provided transparent sample block cover when possible. This cover provides thermal insulation and reduces water condensation. Normally the water (condensed from air) on and around the sample blocks is drained to lab bench through an opening at the bottom of the unit. Excessive water accumulation can be wipe off with paper towel.

Coyote Bioscience, has been dedicated to producing the most portable, smallest and user friendly molecular biological instruments in the world since its foundation in 2009. All of our products are unique and CE certified. In August 2014, we are authorized by the SFDA of Beijing municipal government as a "Medical device manufacturing enterprise".

Moreover, we are also specialized in providing our Customers with the "Lab in a box" and "One step gene test in minutes" solution. "Lab in a box" means all the equipments required for a whole molecular biological experiment could be put in one suitcase with a size of 62*48*27 cm and total weight of 23kg. You could bring With you The suitcase Wherever you want to go. "One step Gene test in minutes" means we could also provide the compatible reagents for the instruments and we are now developing a sulution which involves all the procedures of an experiment, thus saving substantial time for our customers.