Pad3-100C is a heating/chilling mini dry bath incubator.

This unit let you set the temperature between 0ºC～100 ℃. Pad3-100C has a modular design of sample blocks to accommodate different sample tubes or plate, for example, 0.2, 0.5, 1.5 or 2 mL tubes. Please contact us at songl@coyotebio.com for other tube sizes and plate shapes.

-One User Manual

-Temperature range: 0~100ºC (Ambient Temperature: <25℃)

-Temperature range: 4~100ºC (Ambient Temperature: <25℃)

-Sample block temperature evenness：±0.5 ℃

Instruction
Place the unit on lab bench or a similar sturdy and flat surface. The space between the bottom of the unit and the bench should be clear. The sides of the unit should also have at least two inch (5 cm) of clearance to allow ventilation. 

Select the proper size or a combination of blocks according to your sample tube sizes. Insert sample blocks in the opening and make certain that the sample blocks are in close contact with the working plate (Fig. 1). Connect the 12 V DC power adaptor to the DC input terminal on the back of the unit (Fig. 2). Plug the power supply into a wall outlet, and turn on the power switch on the back of the unit (Fig. 2).

Temperature Display: While the device is on, the LED display shows actual temperature on the right side and shows set point on the side.
Temperature setting: press the ▲ and ▼ key to set the temperature.

It is recommended to cover the samples with the provided transparent sample block cover when possible. This cover provides thermal insulation and reduces water condensation . Water may condensed on the sample blocks. Small amount of water is drained to lab bench through an opening at the bottom of the unit. Excessive water accumulation can be wipe off with paper towel.

Coyote Bioscience, has been dedicated to producing the most portable, smallest and user friendly molecular biological instruments in the world since its foundation in 2009. All of our products are unique and CE certified. In August 2014, we are authorized by the SFDA of Beijing municipal government as a "Medical device manufacturing enterprise".

Moreover, we are also specialized in providing our Customers with the "Lab in a box" and "One step gene test in minutes" solution. "Lab in a box" means all the equipments required for a whole molecular biological experiment could be put in one suitcase with a size of 62*48*27 cm and total weight of 23kg. You could bring With you The suitcase Wherever you want to go. "One step Gene test in minutes" means we could also provide the compatible reagents for the instruments and we are now developing a sulution which involves all the procedures of an experiment, thus saving substantial time for our customers.