Address:
Fujian，China
Main Products:
Intermediate,Concrete Admixtures,Agriculture Chemicals
-
FOB PriceNegotiable
-
Min. Order18 Piece(s)
-
Payment Terms-- --
-
Port-- --
-
Delivery Time15 days after payment
-
Place of Origin:China (Mainland)
-
Appearance:grey powder
DESCRIPTION
Silica Fume is a high performance, densified silica fume powdered product, derived
as a by-product from the production of Ferro Silicon using the arc furnace method. Used in pre-mixed concrete for enhancing mechanical properties of concretes with special performance requirements, including increased strength, reduced permeability, improved abrasion resistance and increased corrosion resistance.
TYPICAL USES
Silica Fume can be used to produce all grades of concretes. The chemical and physical properties of Silica Fume can greatly enhance the strength performance and the bonding properties of concrete.
Silica Fume can be used in various applications and projects: Commercial, Civil, Mining and Marine projects.
Silica Fume is suitable for inclusion in general concrete mix designs and in particular has application in high strength/performance concretes and shotcrete / spray mixes.
ADVANTAGES
The addition of Silica Fume can provide;
• Increase compressive strength
• Increase abrasion resistance
• Enhanced sulphate resistance
• Reduces chloride ion permeability
• Enhanced resistance to chemical attack and deterioration
• Improved durability
• Increase bond strength
DOSAGE
The dosage rate for Silica Fume will vary depending on the mix design requirements. Users should determine applicable rates of usage for their purpose. This is best achieved by trial mixes. Typical dose rates range from 5% – 10%.Some users will consider the material a cement replacement, others will consider as additional pozzolanic material
COMPATIBILITY
Silica Fume is compatible and effective in concrete containing all types of Portland, and blended cement which may include Supplementary Cementitious Materials such as Fly Ash and Granulated Ground Blast Furnace Slag.Silica Fume is also suitable for use with chemical admixtures such as water-reducing, accelerating and retarding admixtures which comply to AS 1478.1
SPECIFICATIONS
Items | specification | ||
Appearance | Gray and off-white powder | ||
SiO2 (%) | 85%-90% | 90%-95% | 95%min |
LOI | 6%max | 3%max | 1%max |
Bulk Density(densified) | 500-700kgs/m3 | ||
Moisture (%) | 3%max | 1%max | 1%max |
Specific Surface Area(m2/g) | 15 | ||
Retained on 45 micron sieve (%) | 10%max | 5%max | 3%max |
PACKAGING
Silica Fume is supplied in 900 kg bulk bags,2bags/pallet
Quantity in FCL:18MT/20’
SAFE HANDLING
Silica Fume is classified as hazardous according to the NOHSC criteria and represents a dust hazard that may cause irritation. Users should consult the MSDS for information regarding health and safety.
WARRANTY
The products supplied to be free of material defects and to be of a consistent quality. Should any product be proven to be defective, the liability of the manufacturer shall be limited to the replacement of the product ex-factory.The manufacturer gives no warranty as to the fitness of the products for any particular purpose. The user shall determine the suitability of the product for its intended use.